Safety Information#
Intended Use#
The Printalyzer Enlarging Timer is intended for the control of photographic enlargers and darkroom safelighting. With the included peripherals, it is also intended to be used for the metering of print exposures and the characterization of printing paper.
Symbols#
Symbol |
Description |
|---|---|
|
The general warning symbol indicates the possibility of damaging the instrument or compromising the results of a method |
|
The electrical hazard symbol indicates the presence of electrical components that can be harmful to the operator if handled incorrectly. |
|
Risk of fire |
Safety Warnings#
|
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to the product or other property. After reading this document carefully, keep it in a safe place for later reference. |
|
WARNING: Ensure ground is reliably connected before plugging in the instruments power cord into the power source (receptacle).
Grounding is required to prevent electric shock. If the power source is not grounded, qualified personnel must first install a reliable safety ground.
|
|
CAUTION: Risk of electric shock. Do not open. No user serviceable parts. |
|
WARNING: This device should only be used for the control of photographic enlargers and safelighting. Do not overload output sockets. Outlets have a combined rated load of 4.5A max. |
|
WARNING: Only use your product with the power cord provided by the manufacturer.
Contact Dektronics Inc. for replacement should your power cord become missing or damaged. Use of a mains supply cord with inadequate rating may result in risk of fire.
|
|
WARNING: For continued protection against risk of fire, replace ONLY with a fuse of the specified type and rating.
 Fuse: Rated, F5AH250V, 5x20mm |
|
WARNING: Power cord is used as the main disconnection device. To de-energize equipment, disconnect the power cord. |
|
CAUTION: Protection may be impaired if used in a manner not specified by the manufacturer |
Note: All Countries: Install product in accordance with local and National Electrical Codes |